Permco P360 Series Pump/Motor are a heavy-duty sleeve bushing design in a large frame size. These units are built to withstand working pressure up to 3500 PSI. Internal Cubic inch displacements from 1.80” through 9.00”. The 360 Series Pump/Motor can withstand speeds up to 2400 RPM and produce flows up to 93 GPM. The housings are doweled to withstand higher pressures and are built using high strength cast iron construction. The internals consist of high strength alloy steel gear and shaft sets. Porting options consist of Split flange & SAE ORB ports. Both single inlet/single outlets and single inlet/dual outlet bearing carriers. Overall, the pressure balanced wear plates maintain high pump efficiency throughout all operating ranges.
Technical Specs
Pumps in this series
| P360A467BDZA17-6 | PE360D167RDZA20-6RGZA12-1VD | M360A767UMDA17-6 | P360L131KDZA17-87NGZA15-1 |
| P360B367AHZA17-00ZOZA22-1 | P360L331AHZA25-00FKZA05-1 | P360B367NIZA25-6BKZA10-1 | P360B367DEZA17-6GAZA10-1 |
| P360A467EDZA25-6 | P360A331DBZA17-00 | P360A131FDZA20-87 | P360D087DEZA22-6 |
| P360A086DFZA25-6 | M360A767BRDA15-00 | P360L031AHZA20-6ZFZA20-1 | P360A431BEZA17-87 |
| PB360A067(SPLBB)ZA20-6 | M360A767EFDA25-00 | P360B467IDZA20-6BGZA15-1 | M360C767UBDA15-00 |
| P360C351EAZA17-5 | P360L167LDZA12-6NGZA12-1NGZA10-1 | P360A367DFZA20-6 |
Reseller:
If you’re a distributor, hydraulic repair shop, OEM, you may qualify for reseller discount.
Learn more about Our Reseller Program here →
