Hydraulic Gear Pump M2100A890IDZE10-14

Alternate Part numbers:

• M2100A890IDZE10-14
• PEK 8J

Replaces Muncie PK8-2BSBB/PK108-02BSBB

Standard features include:

• SAE-B-2&4 bolt mounting flange, SAE-B-spline shaft, both side and rear ports and setup for pump/motor dual rotation applications
• A wide range of porting, mounting, and shaft options available
• Roller bearing design in a compact, small frame size
• Doweled and high-strength cast iron construction
• Low weight: 34.5 pounds with a 2” gear, Type II
• Flows up to 39 GPM
• Working pressure up to 3000 PSI
• Speeds up to 2400 RPM
• Cubic inch displacements from 1.00 through 4.00
• Special ring seals and pressure-balanced wear plates maintain high pump and motor
• efficiency throughout all operating ranges
• 100% factory tested per application specifications

Specifications: 

• Permco Dual Ported Pump
• 2/4 Bolt Mount
• SAE B - 7/8”-13T Spline Shaft
• 1” ORB Side & 1” ORB Rear Ports
• 1” Gear Width
• 2.00 cu in. per rev
• 6.5GPM @ 1000 RPM @ 3000 PSI